Admin Password: |
(purposely not displayed for security protection) |
SIP Server: |
(e.g., sip.mycompany.com, or IP address) |
Outbound Proxy: |
(e.g., proxy.myprovider.com, or IP address, if any) |
SIP User ID: |
(the user part of an SIP address) |
Authenticate ID: |
(can be identical to or different from SIP User ID) |
Authenticate Password: |
SENHA! (not displayed for security protection)
|
Name: |
(optional, e.g., John Doe) |
Home NPA: |
|
|
Advanced Options: |
|
Preferred Vocoder:
(in listed order) |
choice 1: choice 2: choice 3: choice 4: choice 5: choice 6: choice 7: |
G723 rate: |
6.3kbps encoding rate
5.3kbps encoding rate |
iLBC frame size: |
20ms
30ms |
iLBC payload type: |
(between 96 and 127, default is 97) |
Silence Suppression: |
No
Yes |
Voice Frames per TX: |
(up to 10/20/32/64 for G711/G726/G723/other codecs respectively)
|
Fax Mode: |
T.38 (Auto Detect)
Pass-Through
|
Layer 3 QoS: |
(Diff-Serv or Precedence value) |
Layer 2 QoS (VoIP): |
802.1Q/VLAN Tag
802.1p priority value
(0-7) |
Layer 2 QoS (PC): |
802.1Q/VLAN Tag
802.1p priority value
(0-7) |
Allow incoming SIP messages from SIP proxy only: |
No
Yes |
Use DNS SRV: |
No
Yes |
User ID is phone number: |
No
Yes |
SIP Registration: |
Yes
No |
Unregister On Reboot: |
Yes
No |
Register Expiration: |
(in seconds. default 1 hour, max 45 days) |
Early Dial: |
No
Yes (use "Yes" only if proxy supports 484 response) |
Allow outgoing call without Registration: |
No
Yes |
Dial Plan Prefix: |
(this prefix string is added to each dialed number) |
No Key Entry Timeout: |
(in seconds, default is 4 seconds) |
Use # as Dial Key: |
No
Yes (if set to Yes, "#" will function as the Dial key)
|
local SIP port: |
(default 5060) |
local RTP port: |
(1024-65535, default 5004) |
Use random port: |
No
Yes |
NAT Traversal: |
No
Yes, STUN server is:
(URI or IP:port) |
keep-alive interval: |
(in seconds, default 20 seconds) |
Use NAT IP |
(used in SIP/SDP message if specified) |
Proxy-Require: |
|
SUBSCRIBE for MWI: |
No, do not send SUBSCRIBE for Message Waiting Indication
Yes, send periodical SUBSCRIBE for Message Waiting Indication
|
Offhook Auto-Dial: |
(User ID/extension to dial automatically when offhook) |
Enable Call Features: |
No
Yes (if Yes, Call Forwarding & Call-Waiting-Disable are supported
locally) |
Use Bell-style 3-way Conference: |
No
Yes (if Yes, *23 will be disabled) |
Disable Call-Waiting: |
No
Yes |
Send DTMF: |
in-audio
via RTP (RFC2833)
via SIP INFO |
DTMF Payload Type: |
|
Send Flash Event: |
No
Yes (Flash will be sent as a DTMF event if set to Yes)
|
Onhook Threshold: |
|
FXS Impedance: |
|
Caller ID Scheme: |
|
Onhook Voltage: |
|
Polarity Reversal: |
No
Yes (reverse polarity upon call establishment and termination)
|
NTP Server: |
(URI or IP address) |
Send Anonymous: |
No
Yes (caller ID will be blocked if set to Yes) |
Anonymous Method: |
Use From Header
Use Privacy Header |
Time to ring: |
|
Special Feature: |
|
Syslog Server: |
|
Syslog Level: |
|
Session Expiration: |
(in seconds. default 180 seconds) |
Min-SE: |
(in seconds. default and minimum 90 seconds) |
Caller Request Timer: |
Yes
No (Request for timer when making outbound calls) |
Callee Request Timer: |
Yes
No (When caller supports timer but did not request one) |
Force Timer: |
Yes
No (Use timer even when remote party does not support) |
UAC Specify Refresher: |
UAC
UAS
Omit (Recommended) |
UAS Specify Refresher: |
UAC
UAS (When UAC did not specify refresher tag) |
Force INVITE: |
Yes
No (Always refresh with INVITE instead of UPDATE) |
Firmware Upgrade and Provisioning: |
Upgrade Via
TFTP HTTP
Firmware Server Path:
Config Server Path:
Firmware File Prefix:
Firmware File Postfix:
Config File Prefix:
Config File Postfix:
Automatic Upgrade:
No
Yes, check for upgrade every
minutes (default 7 days)
Always Check for New Firmware
Check New Firmware only when F/W pre/suffix changes
Always Skip the Firmware Check
|
Firmware Key: |
(in Hexadecimal Representation) |
Authenticate Conf File: |
No
Yes (cfg file would be authenticated before acceptance if set to Yes) |
Lock keypad update: |
No
Yes (configuration update via keypad is disabled if set
to Yes) |
Allow conf SIP Account in Basic Settings: |
No
Yes |
Override MTU Size: |
|
Volume Amplification: |
TX
RX
|
Call Progress Tones:
|
|
|